Welcome to our store!
Tascam US-1x2HR 2IN-2OUT High Resolution Versatile USB Audio Interface Overview:1 XLR mic input and 1 TRS line/guitar input audio interface with 192 kHz support and USB-C bus power connection. The included loopback function and OBS support makes this inter
Tascam US-1x2HR 2IN-2OUT High Resolution Versatile USB Audio Interface Overview:
1 XLR mic input and 1 TRS line/guitar input audio interface with 192 kHz support and USB-C bus power connection. The included loopback function and OBS support makes this interface an excellent choice for podcasts and live streaming. The new US-1x2HR offers simple and intuitive operation, sophisticated looks, a rich assortment of software bundles, and improved audio performance, thanks to the newly enhanced audio circuit.
Two inputs (1 mic / 1 line) / powered by USB bus power
Equipped with two inputs (1 mic / 1 line) and one USB-C port for USB bus power connection.
High resolution reproduction in the US-HR series has been pursued based on TASCAM’s policy to recreate sound as close to the original as possible. Therefore, the in-house developed Ultra-HDDA mic preamp combined with a newly improved audio circuit delivers enhanced audio performance with the most transparent and low-noise sound.
Zero-latency direct monitoring function
Direct monitoring will diverge signals before sending them to the computer, resulting in smooth, in-time monitoring without any sound delay during both recording and performance.
Create quality content with bundled software
The US-HR models come bundled with world-renowned software that will enhance the user’s production workflow. At the core of music production, Steinberg’s Cubase LE/Cubasis LE 3 DAW is included, along IK Multimedia’s Sample Tank SE, which comes free of charge with a massive 30 GB sound library encompassing more than 2,000 different musical instruments.
US-HR models also come with a free 3-month subscription to Auto-Tune Unlimited, a comprehensive suite of industry standard pitch correction and vocal effects.
Interface for podcasts and live streaming
The US-1x2HR can be used with computers or smartphones to easily create podcasts or live streams. The audio can be switched between stereo/mono, and the loopback function allows the audio from the computer to be returned to the streaming software for playback during live streams. US-1x2HR also supports OBS, which is popular and used worldwide.
Compatible with iPad and other iOS devices
The US-1x2HR can be used as an interface for iPad and other iOS devices.
New audio interface engine
Capitalizing on our experience being one of the pioneers in manufacturing USB audio interfaces, we achieved further stability in our native driver. The audio buffer size can be set starting from 4 samples (Windows only) to give the best performance to every different environment; maximizing the capability of the computer in use while creating a low-latency environment.
Robust metal casing
The US-HR models share a solid and practical design intended to withstand long hours of hard use. Its robust metal jacket not only improves its durability but, combined with dye-cast aluminum side panels, provides a sleek, eye-catching design. In addition, all models have just the right weight, so they won’t move when cables are connected or disconnected.
Features at a glance:
Included items
Specifications:
Sampling frequency: 44.1k/48k/88.2k/96k/176.4k/192k Hz
Quantization bit rate: 24bit
Analog audio inputs
MIC IN (IN 1)
Connector: XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
Input impedance 2.k ohms
Maximum input level
(GAIN:MIN): +9dBu (2.183Vrms)
Gain: 58dB
LINE/INST IN(IN 2)
LINE IN
Connector: 6.3mm(1/4″) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
When set to “LINE” at LINE/INST switch
Input impedance 10k ohms
Maximum input level
(GAIN:MIN): +20dBu(7.75Vrms)
Gain: 45dB
INST IN
Connector: 6.3mm(1/4″) TS-jack(T:HOT, S:GND), UNBALANCED
When set to “INST” at LINE/INST switch
Input impedance 1M ohms or more
Maximum input level
(GAIN:MIN): +3dBV(1.1425Vrms)
Gain: 45dB
LINE L/R IN
Connector: RCA pin-jack, UNBALANCED
Input impedance 10k ohms
Maximum input level: +6dBV(1.9953Vrms)
Analog audio outputs
LINE OUT
Connector: RCA pin-jack, UNBALANCED
Output impedance: 100 ohms
Maximum output level: +6dBV (1.995Vrms)
PHONES
Connector: 6.3mm(1/4″) stereo phone jack
Maximum output level 18mW+18mW or more
(THD+N 0.1% or less, 32ohms loaded)
Control IN / OUT
USB
Connector: USB Type-C
Format: USB2.0 HIGH SPEED (480Mbps)
DC IN 5V
Connector: USB Micro B type
Power
When connected PC: USB bus powered
When connected iOS: USB power adapter (that can supply 5V and a current of at least 700mA)1
External battery pack (that can supply 5V and a current of at least 700 mA)2
Power consumption: 1.8W
Dimensions: 146(W) 55(H) 120(D)mm (including protrusions)
Weight: 623g
Operating temperature: 5 to 35C
Accessories: USB cable (Type-A to Type-C), Set of DAW software installation guides, Set of DAW plug-in software installation guides, Owner’s Manual (including warranty)
Audio performance
Mic amp EIN (equivalent input noise): -128dBu or less (150ohm termination with gain knob at MAX)
Frequency response
MIC IN 1:
44.1k/48k Hz 20Hz to 20kHz, +0dB/-0.4dB(JEITA)
88.2k/96k Hz 20Hz to 40kHz, +0dB/-0.4dB(JEITA)
LINE IN 2:
44.1k/48k Hz 20Hz to 20kHz, +0dB/-0.3dB(JEITA)
88.2k/96k Hz 20Hz to 40kHz, +0dB/-0.3dB(JEITA)
LINE OUT:
44.1k/48k Hz 20Hz to 20kHz, +0.2dB/-0.4dB(JEITA)
88.2k/96k Hz 20Hz to 40kHz, +0.2dB/-0.4dB(JEITA)
THD + N:
0.0013% (MIC IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF)
0.0027% (LINE IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF)
0.0015% (LINE OUT, 1kHz sine wave, -4dBFS input, MONITOR knob at maximum, 20kHz SPCL LPF)
S/N ratio:
109dB (MIC IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight)
105dB (LINE IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight)
110dB (LINE OUT, MONITOR knob at maximum, 20kHz SPCL LPF+A-Weight)
Crosstalk: 95dB or more (MIC/LINE IN to LINE OUT, 1kHz sine wave, GAIN knob at minimum)
Made in China
Reviews
There are no reviews yet.